Skip to main content

PDUs

Normally the Dome projectors are controlled by the Tech-panel on the Showmaster controller

But in an emergency, the PDU's below can be used directly, to restart the projectors, the ATLAS and DRACO clusters, and other computers and/or equipment.

Dome Area

PDU-name: pdu-00ed6a.pdu.c.itn.liu.se

IP: 172.19.6.231

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  1. Dome Projector 1 (XDL)
  2. Blend Plate Proj 1
  3. dome-ena-dec01
  4. dome-ena-dec02

Needs to get IP address changed, in both the device and perhaps the Showmaster (if IP and not DNS is used)

PDU-name: pdu-00ed70.pdu.c.itn.liu.se

IP: 172.19.6.232

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  • Dome Projector 2 (XDL)
  • Blend Plate Proj 2
  • Dome Projector 5 (XDL) (To be dome-ena-dec03)
  • Blend Plate Proj 5 (dome-ena-dec04)

Needs to get IP address changed, in both the device and perhaps the Showmaster (if IP and not DNS is used)

PDU-name: pdu-00ed61.pdu.c.itn.liu.se

IP:  172.19.6.233

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  • Dome Projector 3 (XDL)
  • Blend Plate Proj 3
  • dome-ena-dec05
  • dome-ena-dec06

Needs to get IP address changed, in both the device and perhaps the Showmaster (if IP and not DNS is used)

PDU-name: pdu-00ed63.pdu.c.itn.liu.se

IP: 172.19.6.234

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  • Dome Projector 4 (XDL)
  • Blend Plate Proj 4
  • Dome Projector 6 (XDL) (To be dome-ena-dec07)
  • Blend Plate Proj 6 (To be dome-ena-dec08)

Needs to get IP address changed, in both the device and perhaps the Showmaster (if IP and not DNS is used)

PDU-name: pdu-00f2cf.pdu.c.itn.liu.se

IP: 172.19.6.235

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  1. Dome Projector 5 (XDL)
  2. Blend Plate Proj 5
  3. dome-ena-dec09
  4. dome-ena-dec10

PDU-name: pdu-00f2d2.pdu.c.itn.liu.se

IP: 172.19.6.236

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  1. Dome Projector 6 (XDL)
  2. Blend Plate Proj 6
  3. dome-ena-dec11
  4. dome-ena-dec12

PDU-name: pdu-00f2cd.pdu.c.itn.liu.se

IP: 172.19.6.237

Connector:

Switch:

Temperature Probe:  (N/A)

Port / Devices:

  1. Dome Insert Projector (F90)
  2. HDBaseT Receiver
  3. PTZ-Camera/BirdDog 1
  4. PTZ-Camera/BirdDog 2

Pre-show Area

PDU-name: pdu-008d07.pdu.c.itn.liu.se

IP: 172.19.6.239

Connector:

Switch:

Temperature Probe:  (N/A)

Devices: BLOCKS11, External PDU (not exactly sure what's connected to this)

Server Room

PDU-name: pdu-00f119.pdu.c.itn.liu.se

IP: 172.19.6.21

Connector:

Switch:

Temperature Probe: 1 ("Cold" side), 2 (Warm side)

Devices:

  1. DRACO-01
  2. DRACO-02
  3. DRACO-03
  4. DRACO-04
  5. DRACO-05
  6. DRACO-06
  7. DRACO-00
  8. Unused Port

PDU-name: pdu-00fbe1.pdu.c.itn.liu.se

IP: 172.19.6.22

Connector:

Switch:

Temperature Probe: 1 (N/A), 2 (N/A)

Devices:

  1. ATLAS-01
  2. ATLAS-02
  3. ATLAS-03
  4. ATLAS-04
  5. ATLAS-05
  6. ATLAS-06
  7. ATLAS-00
  8. Showmaster1

PDU-name: pdu-006440.pdu.c.itn.liu.se

IP: 172.19.6.23

Connector:

Switch:

Temperature Probe: 1 (N/A), 2 (N/A)

Devices:

  1. HASHI
  2. PoE-switch for the VIOSO Dome calibration cameras.
  3. HDMI/HDBT Matrix
  4. Rack Monitor Left
  5. Touch screen
  6. Rack Monitor Right
  7. Lindy Monitor Table
  8. FISHY

PDU-name: pdu-006442.pdu.c.itn.liu.se

IP: 172.19.6.24

Connector:

Switch:

Temperature Probe: 1 (N/A), 2 (N/A)

Devices:

  1. BRAVO-01
  2. BRAVO-02
  3. BRAVO-03
  4. BRAVO-04
  5. BRAVO-05
  6. BRAVO-06
  7. Unused Port
  8. BRAVO-00

Server room PDU 3 and 4, powers the following devices simultaneously , since these servers/computers/equipment have redundant power supplies.

So "Restart", "Off" or "On" must be done on both PDU's (as quick as possible).

  • MYUTN1
  • MYUTN2